HV1000-1 On-line microhardness tester is mainly used for the determination of micro-Vickers hardness of various metals and some non-metallic materials. It can measure the hardness of various parts (machined parts, forgings, cast iron, cast steel parts, etc.), non-ferrous metals, thermal post-treatment parts, various small and thin parts, glass, ceramics, agate, gems, etc, at the same time, it is suitable for the determination of the effective depth of carbonization and quenching hardening layer, coating layer, surface coating and heat-affected parts of welding parts. It can also be used to observe the internal metallographic structure of various metal parts and to collect and display the image. It is especially suitable for measuring the hardness gradient distribution curve of the workpiece and measuring the surface hardness of the gear after heat treatment, and the depth of the effective hardening layer.
Production Feature
This product uses a built-in light source and a unique precision design of the built-in camera to make the indentation imaging clearer and the measurement more accurate. The use of computer online software display, the operation of the software control lights, turret, a key to start hardness measurement, can be a variety of hardness scale conversion, software using automatic measurement, manual measurement of two kinds of measurement.
This machine is equipped with 10 times and 40 times objective lens to participate in the measurement, so that the measurement range is larger, the application range is wider, the operation is intuitive and clearer, and the computer software display, test force, indentation length, hardness value, test force retention time, date, time, hardness conversion value and other functions. It has the conversion scale, storage and other functions, and has a built-in camera, online measurement software.
Technical Parameter
|
Test force |
10gf、25gf、50gf、100gf、200gf、300gf、500gf、1kgf |
|
0.098N、0.245N、0.49N、0.98N、1.96N、2.94N、4.9N、9.8N |
|
|
Conversion Ruler |
HRA、HRB、HRC、HRD、HRF、HV、HK、HBW、HBS、HR15N、HR30N、HR45N、HR15T、HR30T、HR45T |
|
Test mode |
HV/HK |
|
Hardness testing range |
5~5000HV |
|
Test force application method |
Automatic(Loading、Dwelling、Unloading) |
|
Turret rotation mode |
Automatic |
|
Objective lens |
10X、40X |
|
total magnification |
100X 400X |
|
Test force and load time |
1~100s |
|
X-Y worktable size |
100*100mm |
|
Maximum movement of X-Y test bench |
25*25mm |
|
Data output |
Software |
|
Maximum height of test piece |
120mm |
|
Distance from center of indenter to inner wall |
120mm |
|
Power supply |
AC220V±5%,50~60Hz |
|
Implementation standard |
ISO ,ASTM ,GB/T |
|
External dimensions |
452*220*585mm |
|
Package dimensions |
595*415*810mm |
|
Net weight |
About 45kg |
|
Gross weight |
About 60kg |
Packing List
|
Weight shaft |
|
PC |
1 |
|
Cross test bench |
|
PC |
1 |
|
Screwdriver |
|
PC |
2 |
|
small level |
|
PC |
1 |
|
Micro Vickers hardness block |
High value, low value |
PC |
2 |
|
Power Cord |
|
PC |
1 |
|
Description of the Manual |
|
SHEET |
1 |
|
Certificate |
|
SHEET |
1 |
|
Weight |
|
PC |
6 |
|
Adjusting screw |
|
PC |
4 |
|
Spare fuse |
2A |
PC |
2 |
|
Accessory box |
|
PC |
1 |
|
Dust cover |
|
PC |
1 |
|
Fine wire holding stage (optional) |
|
PC |
|
|
Flat-jaw chuck (optional) |
|
PC |
|
|
Sheet holding table (optional) |
|
PC |